M42 Bi-Metal Lâmina de serra de fita para Metal

China: HB Marca: CH Tamanho: comum Materiais: chapa de aço Especificação: ISO9001 Código HS: 8202991000 Nós fornecemos aos clientes com produtos de excelente Qualidade a um preço competitivo & período;

size	10/14	8/12	6/10	5/8	4/6	3/4	2/3	1/1.5	1.4/2	0.75/1
19mmx0.9	ok	ok	ok	ok	ok	ok
27mmx0.9	0k	0k	ok	ok	ok	ok	ok
34mmx1.1	ok	ok	ok	ok	ok	ok	ok
41mmx1.3	ok	ok	ok	ok	ok	ok	ok	ok	ok
54mmx1.6						ok	ok	ok	ok	ok
67mmx1.6						ok	ok	ok	ok	ok
80mmx1.6						ok	ok	ok	ok	ok

A escolha do ângulo do dente

Front Angle	The range of the cutting material	Steel types	Note
0°	1.the profile angle is bigger and the strength is higher, so it's suitable for cutting different kinds of the material		It's better to choose the bigger front tooth agnle when the stiffness for the procee system  is poor or the power for the saw machines is shortage
0°~5°	1.suitable for cutting brittle materials;	Such as: gray cast iron, High speed steel and chilled cast iron, tool steel, alloy steel, spring steel, high quality carbon structural steel, bearing steel, steel, martensite stainless steel and heat resistant steel (HT200,65Mn,W18Cr4V,T12,50Cr,60Si2MnA,1Cr12,1Cr13,GCr15)
	2.suitable for cutting hard material;
	3.Suitable for interrupted cutting or the forging ,casting with crustaceous;
	4.applicable to small section,thin walled pipe
6°~10°	1.applicable to the workpiece material strength,low hardness, and good plasticity	Such as: ordinary carbon structural steel, high quality carbon structural steel, alloy steel, carbon tool steel and austenitic stainless steel, nodular cast iron, nonferrous metals (Q235-A,20,30,45,T10,40Cr,20CrMo,1Cr18Ni9Ti,Cu And so on)
	2.suitable for cutting solid material,thick walled pipes

Grupo de Produto : Serra de fita